Lighting

Automotive lighting vents from Gore block water, automotive fluids and contaminants while effectively reducing condensation and allowing lamps to vent during rapid temperature/pressure differentials.

Image showing where Gore products are included on the exterior of a car
A
B
C
D
E

Headlamps

Patented headlamp venting products protect against condensation and harsh contaminants, for longer life and fewer warranty claims.

More Info
Close

Fog Lamps

High-temperature fog lamps venting products rapidly equalize lamp pressure and provide a long-lasting barrier to water, dirt and oils.

More Info
Close

Rear Lamps

Rear lamp venting products reliably withstand environmental challenges and pressure differentials to extend service life and reduce warranty claims.

More Info
Close

Center High Mounted Stop Lamps (CHMSL)

CHMSL venting products reliably manage lamp pressures and block contaminants to increase durability, and reduce warranty claims.

More Info
Close

Side-Marker Lamps

Side-marker lamp venting products reliably manage lamp pressures and block contaminants to increase durability, and reduce warranty claims.

More Info
Close

Electronic Control Units

Our vents are engineered to provide superior performance in the face of extreme temperature and pressure fluctuations, and provide lasting protection for electronic control units in harsh automotive and natural environments.

Image showing the electronic control units inside of a car
A
B
C

Engine Control Unit

Performance-proven venting products from Gore deliver extended protection to increase the durability of rapid-response engine control units.

More Info
Close

Electronic Control Units

Gore's high-performance vents extend product life and protect the entire steering rack, for higher customer satisfaction and fewer failures.

More Info
Close

ABS Control Units

Reliable venting products from Gore reduce warranty issues in ABS control units by equalizing pressure and blocking contamination.

More Info
Close

Sensors

Domestically and internationally, our vents reliably protect sensors from failure-inducing operating conditions and contaminants, so the sensors – and the systems they support – can be trusted.

Image showing the sensor components inside of a car
A
B
C
D

Humidity Sensor

High-airflow GORE® Automotive Vents facilitate rapid response in humidity sensors, for higher performance and customer satisfaction.

More Info
Close

Position Sensor and Actuator

Small-diameter engineered vents provide durable protection, so position sensors and actuators consistently deliver accurate measurements.

More Info
Close

Radar Sensor

Highly-reliable venting products protect the integrity of sensitive radar equipment from water and harsh road contaminants.

More Info
Close

Oxygen Sensor

High-temperature oxygen sensor venting products provide global reliability and rapid response, even in temperatures above 250oC.

More Info
Close

Motors

Automotive motor vents from Gore can help to ensure that a starter will start, a wiper will wipe, and a pump will pump... as reliably and durably as the designer intends, and the customer demands.

Image showing the motor components inside of a car
A
B
C

Wiper Motor

Highly-reliable venting products from Gore deliver safety-enhancing peak performance and longer service life in wiper motors.

More Info
Close

Electronic Pump Motor

High-airflow vents from Gore reduce moisture vapor ingress and manage rapid temperature changes, for fewer pump motor warranty claims.

More Info
Close

Starter Motor

Durable GORE® Automotive Vents provide long-lasting protection for starter motors exposed to harsh under-hood conditions and road-debris hazards.

More Info
Close

Powertrain

Automotive powertrain vents equalize pressure, while reliably protecting components from dust, dirt and water. They can also reduce the cost and simplify the design of axles, limited slip couplings, transfer cases, transmissions and fluid reservoirs.

Image showing the powertrain components inside of a car
A
B
C
D
E

Front Drive Module

Specially-engineered venting products preserve front drive module performance in the harshest on- and off-road conditions.

More Info
Close

Transmission

Specially-engineered venting products preserve transmission component performance in the harshest on- and off-road conditions.

More Info
Close

Power Transfer Unit/Transfer Case

Specially-engineered venting products preserve PTU component performance in the harshest on- and off-road conditions.

More Info
Close

Fluid Reservoir Urea/SCR (Selective Catalytic Reduction)

Superior pressure-equalizing vents from Gore protect seals in liquid reservoirs and increase lifetime performance of mechanical pump components.

More Info
Close

Rear Drive Module/Limited Slip Coupling

Specially-engineered venting products preserve axle/limited slip coupling performance in the harshest on- and off-road conditions.

More Info
Close

Interior Electronics

Image of a car
A
B
C
D
E

Telematics Control Units

Our EMI grounding pads achieve reliable electrical performance, maintaining consistent contact over time without damaging enclosure surfaces.

More Info
Close

Infotainment Systems

EMI gaskets from Gore enhance system reliability and performance by maintaining consistent contact in challenging conditions.

More Info
Close

Navigation Systems

Our grounding pads deliver reliable electrical performance to ensure consistent connectivity for the driver's GPS navigation.

More Info
Close

Connectivity Devices

Engineered with a non-abrasive, patented construction, our gaskets reduce EMI without compromising the integrity of the enclosure's surfaces.

More Info
Close

Instrument Display Systems

Our Supersoft Series is conductive on contact, and resilient after compression, which ensures minimal deflection stress on displays.

More Info
Close

Hybrid / EV

Hybrid and electric vehicle components require advanced venting products to address the unique challenges, and operating conditions inherent in these technologies.

Image showing the inside of a hybrid car
A
B
C
D
E

Converter / Inverter

High-airflow GORE® Automotive Vents deliver optimal protection and durability for converters, inverters or any large enclosures with significant free space.

More Info
Close

Charger

Venting products from Gore deliver unsurpassed pressure equalization and protection for chargers and other performance-critical electronics.

More Info
Close

Power Distribution Module

Durable vents from Gore maximize the reliability and service life of power distribution modules, for fewer warranty claims.

More Info
Close

Electric Traction Motor

Gore vents for electric traction motors shield against the harshest road contaminants for higher reliability, with lower design costs.

More Info
Close

Battery Pack / Battery Box

High-airflow vents equalize gasses and reduce condensation and corrosion inside large enclosures, for maximum protection and performance in battery packs.

More Info
Close

Fuel Cell EV

Gore continues to apply its 25 years of expertise in electrochemistry, material science and high-volume manufacturing to make the next generation of commercial fuel cell electric vehicles possible. Vehicles powered by fuel cells are efficient, emissions-free and growing in number worldwide.

Image showing the inside of a car that runs on fuel cells
A

Fuel Cell Stack

GORE® PRIMEA® Membrane Electrode Assemblies and GORE-SELECT® Membranes
Gore provides fuel cell components with high durability, reliability and power density. Fuel cell stacks made with Gore components are small, powerful and able to withstand harsh automotive conditions.

More Info
Close